The Faber 232 bar, 15 litre (125 cubic foot), 204 mm (8 inch) diameter, Steel Cylinder with DIN/K valve and cylinder boot is Nitrox ready.

The Faber 15 litre is great for divers with higher than average air consumption rates. Thus it's often a good choice for new divers. Yes, your buddy might be only using a 10.5 or 12.2 litre cylinder, but your pressure drop rate during the dive will be similar to them, simply because you started with much more air.

Steel Cylinders for Scuba Diving

The Faber 232 bar, 12.2 litre (100 cubic foot), 204 mm (8 inch) diameter, Steel Cylinder with DIN/K valve and cylinder boot is Nitrox ready.

These cylinders are made by Faber, the leading European manufacturer of scuba diving tanks, with extremely high quality steel made to international standards. Faber cylinders display a unique combination of size, weight and buoyancy.

CERTIFIED QUALITY

Faber Cylinders thank to our high quality level are approved in the great part of the countries worldwide. From Americas to Europe, from Russia to Korea and Japan up to New Zealand and Australia we can provide divers with the proper and approved products they need.

IDEAL BUOYANCY

It is well known that steel cylinders have better buoyancy than Aluminium cylinders. Faber cylinders are the only ones made using high quality steel plates that allow an even better performance in buoyancy. Our scuba tanks are neutral or slightly negative when empty, giving divers a great benefit in their diving.

THE GLOBAL MANUFACTURER

Faber Cylinders are appreciated worldwide by scuba divers who choose steel cylinders for their aqualung apparatus. To give divers the lightest steel tanks with ideal buoyancy, our scuba diving cylinders are diligently manufactured using high quality steel plates.

Why Faber Steel Cylinders are the best
Faber’s Cylinders are appreciated worldwide by scuba divers who choose steel tanks for their aqua-lung apparatus. To give you the lightest (and hence an optimum wall thickness) steel tanks (cylinders) with an ideal buoyancy, our scuba diving cylinders are diligently manufactured using high quality steel plates. If you are already using steel cylinders when diving you don't need to be convinced about the advantages of steel. Beside the buoyancy attractions, it occupies a far lower volume for the same water capacity allowing you to enjoy greater space and freedom and free from any worries of developing any premature defects such as sustained load cracking (SLC) found in some aluminium alloy cylinders such as those from alloys AA6351, AA6082, which could limit the life of your cylinder.

So do be sure that the next time you purchase a cylinder the FABER stamp is on it. If you are not using steel cylinders, then do use one and you will soon realise what you have been missing. No other manufacturer in the world can match Faber cylinders capabilities and the breadth of our product range.

Faber 15 Litre 232 bar Cylinder Specifications:

Fill pressure: 232 bar (3365 psi)
Test pressure: 348 bar (5047 psi)
Standard: BS 5045 Pt 1
Material: 34CRMO4 Chromium Molybdenum Alloy Steel
Manufacturing Process: Cold deep drawing from steel plate
External Primary Finish: Hot Zinc sprayed, layer thickness 60/70 microns
External Final Finish: 2 part polyurethane white paint sprayed and air dried
Internal Finish: Chemically treated with Ferrous Phosphate
Neck Thread: 3/4 inch NPSM

Faber 232 bar 15L Steel Cylinder with DIN/K Valve